Seal All Fluid (SAF) is the South East Asia Master Distributor for Shinhoo Canned Motor Pumps manufactured by Hefei Xinhu Canned Motor Pump Co. Ltd., China. Shinhoo produced thousands of Canned Motor Pumps that have successfully solved fluid leakage problems for different requirements. Shinhoo offes a complete range of Canned Motor Pumps for all types of pumping needs, including high temperature applications, volatile fluids, corrosive & hazardous fluids, etc.
Shinhoo Canned Motor Pump adopts advanced hydraulic model with high hydraulic efficiency and lower NPSH so as to reduce the cost of electric energy and investment. Realizing automatically balance of axial thrust bases on hydraulic theory so as to reduce the load and improve the service life of bearings.
Range of Pumps
Hollow Shaft Basic Type (HV Type)
The pump and motor are connected directly. With inner circulation via hollow shaft. Widely use.
External Circulation Basic Type (HP Type)
The pump and motor are connected directly. With external circulation pipe.
Reverse Circulation Type (HN Type)
The pump and motor are connected directly. Suitable for handling easy vaporized liquid.
Vertical In-line Reverse Circulation Type (HW Type)
Another reverse circulation type. Suitable for handling LPG, LNG, etc.
High Temperature Isolation Type (HT Type)
The pump and motor are connected with an adapter which can separate thermal of the pump from the motor and prevent heat transfer. Suitable for handling high temperature fluid such as hot oil and water, etc.
Self-priming Type (HZ Type)
Suitable for handling fluid from underground tank.
Slurry Handling Type (HS Type)
With inner mechanical seal. Suitable for handling slurry fluid with little amount of soft particles.
High Melting Point Type (HR Type)
With full heating jacket. Suitable for handling high melting point fluid.
Super High Temperature for High Melting Point Type (HR-Y Type)
Super high temperature motor with heating jacket. Suitable for handling higher melting point fluid.
Super High Temperature Type (HV-X Type)
Utilizing exclusive super insulation materials. Suitable for high temperature fluid. No cooling required.
Gas Seal Slurry Handling (HJ-HG Type)
With inner mechanical seal and gas seal chamber. Suitable for handling slurry fluid containing slurry concentration of which shall be no more than 30% wt.
Multi-stage Type (HP-M, HN-M, HT-M, HW-M Type)
Higher head pump.
High Pressure & Temperature Pump (HTM Type)
Nuclear industry, high pressure and temperature test system, super critical process and chemical process.